High Pressure Gas Hoses Manufactured to ISO 14113

High pressure flexible hoses manufactured in accordance with BS EN ISO 14113 are used to connect gas cylinders direct to manifolds. For all applications including Oxygen, Argon, Nitrogen, CO2, Hydrogen and Propane, this is 300 bar, hence hoses of this kind that are non-metallic - elastomeric or PTFE lined, and should be routinely replaced every five years.

In accordance with BCGA CP4, we recommend that such high pressure, flexible hoses be fitted with an anti-whip cable. The purpose of this cable is to minimise or eliminate the risk of personal injury in the event of a hose burst or failure. Indeed, any hose operating at over 40 bar should be protected by this type of mechanism. Remember, the greater the hose length, the greater the risk!

The hoses are available in three standard lengths, 1 metre, 2 metre, 3 metre and are complete with appropriate end fittings (cylinder connection inlet and swivel nut outlet, for fitting to the manifold).

They are available for following gases/gas mixtures:

  • Inert gases - (Air, Argon, Helium, Nitrogen etc.)
  • Also as above for Helium with Nevoc Fitting (Air Products) 300 Bar
  • CO2 - BS No.8 inlet with G3/8" swivel outlet 300 Bar
  • Oxygen - 300 Bar
  • Hydrogen, Propane etc 300 Bar
  • Acetylene (30 Bar)

Need technical support? Call us free on 0800 975 9710

© 2023 AES Industrial Supplies Limited

Company Registration: 07988136 Registered Office: Olympic House, Collett, Southmead Park, Didcot, Oxfordshire, United Kingdom, OX11 7WB


We have placed cookies on your device to help make this website better.