Ultima-TIG Tungsten Grinder Package

This is a wet grinder of tungsten electrodes that ensures precise grinding at the correct angle and perfect centring of the tip of the electrode. It grinds down to 8 mm which results in minimal electrode waste.

Highlights

• Sealed grinding chamber with dust collector to protect the user
• Variable angle setting gives more flexibility
• Wet grinding prevents overheating of the electrode during grinding
• High grinding speed provides faster grinding and a smooth surface
• The electrode holder ensures centring of the tip and reduces waste
• Less electrode waste results in a short payback time

Package Includes

• Grinder complete with table, diamond disc and grinding liquid
• Electrode holder
• Electrode clamps for Ø1.6, 2.4 and 3.2 mm electrodes (clamps are available for other electrode sizes)

Ultima-TIG is CE marked and meets all current EU regulations

Applications

• Orbital welding
• Robot/automated welding
• Field welding
• Plasma welding
• Manual welding

Environmentally Friendly & Safe

Ultima-TIG is the environmentally friendly wet grinder of Tungsten electrodes for TIG welding, with minimal wastage of the expensive electrodes. Ultima-TIG is constructed with a unique disposable container that automatically collects the toxic dust particles and ensures safe disposal.

Wet Grinding

The combination of liquid for cooling and a high grinding speed of the diamond disc results in a polished and even surface of the Tungsten electrode. In addition, the cool wet grinding shortens the grinding time and prevents overheated and damaged electrodes.

Cost-Effective in High-Quality

Ultima-TIG’s unique construction reduces the waste of expensive Tungsten electrodes and reduces the time spent on grinding, resulting in a short payback time. The variable angle adjustment and unique clamping system centres the electrode, so that the grinding is carried out in the correct longitudinal direction of the electrode. A precise angle is not only important for the quality of the welding seam; the number of re-ignitions between re-grinding is also increased.

Simple Operation

Set the variable angle setting at the desired angle. Place the electrode in the electrode holder and tighten it in the stick-out. Insert the electrode holder, turn on the grinder and rotate the electrode holder until grinding is finished. After grinding, flatten the tip by placing the angle adjustment in the 90° position, if needed.

New Engine Control with

• Service indicator
• Overload protection
• Readout the number of grindings

Specifications